If your Swan steam cleaner is leaving streaks on hard floors, this may be caused by a dirty mop pad or using too much steam.
Try the following steps:
- Clean the mop pad: Remove and wash the pad if it is dirty or has collected residue. Allow it to dry fully before reuse.
- Use a clean pad: Make sure the pad is clean and in good condition before starting.
- Reduce the steam setting: Use a lower steam setting on delicate or sealed surfaces, where recommended.
- Check your flooring: Make sure your floor is suitable for steam cleaning by checking the flooring manufacturer's guidance.
If streaking continues, consult your user manual for the recommended steam settings and cleaning instructions for your model.